LCD Description
Our high-quality 1.83 inch IPS LCD Display Module is engineered for high-performance compact visual applications, delivering exceptional clarity with a 240(RGB)x284 resolution. Designed with an all-angle IPS viewing direction, this display ensures accurate color reproduction from any perspective.
As a professional display manufacturer, we ensure this 1.83 inch IPS LCD Display Module features an efficient 4-Line SPI interface, which significantly reduces the required I/O ports for developers. Powered by the reliable NV3030B-03 driver IC, the 1.83 inch IPS LCD Display Module guarantees precise pixel timing and stable performance during operation. With a high backlight brightness of 300 cd/m², it maintains excellent readability.
If you are looking for a reliable 1.83 inch IPS LCD Display Module factory supplier for your mass production, please feel free to contact us for datasheet downloads and competitive bulk pricing quotes.
| Item | Contents | Unit |
| Display Size(Diagonal) | 1.83 | inch |
| LCD type | α-Si TFT | – |
| Display Mode | IPS /Transmissive / Normally Black | – |
| Resolution | 240(RGB)x284 | – |
| View Direction | All | |
| Module Outline | 31.72(H)x39.23(V)x1.9(T) | mm |
| Active Area | 29.52(H) X34.932 (V) | mm |
| Touchscreen | TBD | |
| Display Colors | 262K | – |
| Interface | 4 Line SPI | – |
| Driver IC | NV3030B-03 | – |
| Operating Temperature | -20~70 | ℃ |
| Storage Temperature | -30~80 | ℃ |
Drawing
SPI Interface
| NO | SYMBOL | FUNCTION |
| 1 | GND | Power Ground |
| 2 | RS | -Write enable in MCU parallel interface. – Display data/command selection pin in 4-line serial interface. – Second Data lane in 2 data lane serial interface |
| 3 | CS | Chip selection pin |
| 4 | SCL | This pin is used to be serial interface clock |
| 5 | NC | Floating |
| 6 | NC | Floating |
| 7 | NC | Floating |
| 8 | SDA | SPI interface input/output pin |
| 9 | RESET | This signal will reset the device and it must be applied to properly initialize the chip. Signal is active low. |
| 10 | VDD | Power Supply for analog VCC=2.5V~3.3V. |
| 11 | VDD | Power Supply for analog VCC=2.5V~3.3V. |
| 12 | LEDA | LED anode |
| 13 | LEDK | LED Cathode |
| 14 | TE | Tearing effect signal is used to synchronize MCU to frame memory |
| 15 | GND | Power Ground |
