LCD Description
This premium 2.0-inch SPI TFT LCD Display module is engineered to deliver exceptional visual clarity, vibrant colors, and dependable performance for next-generation smart hardware and industrial equipment. Featuring a unique 240×296 dots resolution, this active-matrix liquid crystal screen utilizes advanced wide-viewing technology to ensure a true all-way full viewing angle (ALL O’clock), As a highly versatile SPI TFT LCD Display, this unit is driven by the efficient ST7789V controller IC.
Operating via a serial peripheral interface (SPI), this compact SPI TFT LCD Display minimizes required pin counts and optimizes power consumption, significantly simplifying hardware circuit design and firmware development for engineers.
With an optimized backlight brightness of 350 cd/m², this high-quality SPI TFT LCD Display variant guarantees crisp indoor readability and outstanding optical performance for handheld devices. To meet diverse interactive demands, it supports both Resistive Touch Panels (RTP) and Capacitive Touch Panels (CTP) customization options. If your project requires custom integration, feel free to explore our full range of factory-direct Touch Screen Display solutions or contact our engineering team for specialized support.
| Item | Contents | Unit |
| Size | 2.0 | inch |
| LCM Dimension | 34.04（W）* 43.32（H） * 1.70(T) | mm |
| LCD Active Area | 32.04*39.51 | mm |
| Number Of Dots | 240×296 | pixel |
| LCD Type | a-Si TFT | |
| Viewing Direction | IPS | |
| Driver IC | ST7789 | |
| Interface Type | SPI | |
| Operating Temperature | -20℃~ 70℃ | |
| Storage Temperature | -30℃~ 80℃ | |
| Backlight Type | 4 LEDs | |
| Brightness | 300 | cd/m² |
Drawing
SPI Interface
| NO | SYMBOL | FUNCTION |
| 1 | NC | Floating |
| 2 | GND | Power Ground |
| 3 | LEDA | LED anode |
| 4 | LEDK | LED Cathode |
| 5 | GND | Power Ground |
| 6 | RESET | This signal will reset the device and it must be applied to properly initialize the |
| 7 | RS | Destination register selection. |
| 8 | SDA | SPI interface input/output pin |
| 9 | SCL | This pin is used to be serial interface clock |
| 10 | VCC | Power Supply for analog VCC=2.5V~3.3V. |
| 11 | IOVCC | Power Supply for analog VCC=1.8V |
| 12 | CS | Chip selection pin |
| 13 | GND | Power Ground |
| 14 | NC | Floating |
